5.512 Inch | 140 Millimeter x 8.268 Inch | 210 Millimeter x 2.598 Inch | 66 Millimeter SKF 7128KRDT/7128KRD3T Angular Contact Ball Bearings

B:74.00 mm; Basic Dynamic Radial Load Rating C:358000 N; Sealed Speed Rating n3:780 rpm; Accessories:Shield & Seal; Grease Speed Rating Open/Shielded n1:1200 rpm; Fillet Radius ra:3.00 mm; D:460.0000 mm; Oil Speed Rating Open/Shielded n2:1500 rpm; Basic Static Radial Load Rating Co:500000 N; d:300.0

db min.:168 mm; Fatigue load limit Pu:83 kN; Ba min.:9 mm; Calculation factor Y1:3; Da max.:229 mm; K:6 mm; Calculation factor Y2:4.6; B1:93 mm; Mass bearing + sleeve:14.5 kg; D:240 mm;

r3,4 min.:6.4 mm; Comparative radial load rating CF:1660 kN; d:558.8 mm; Mass bearing:375 kg; B:322.265 mm; D1 ≈:678 mm; T:322.268 mm; Basic dynamic load rating C:6270 kN; D:736.6 mm; d1 ≈:604 mm;

Basic Dynamic Radial Load Rating C:5070 N; Oil Speed Rating n2:30000 rpm; Fillet Radius ra:0.64 mm; Sealed Speed Rating n3:17000 rpm; Oil Speed Rating Open/Shielded n2:30000 rpm; Grease Speed Rating n1:24000 rpm; D:30.0000 mm; B:9.00 mm; Basic Static Radial Load Rating Co:2360 N; Grease Speed Rating

Basic Static Radial Load Rating Co:122000 N; d:55.000 mm; Accessories:One Seal; Basic Dynamic Radial Load Rating C:119000 N; D:120.0000 mm; Oil Speed Rating n2:5000 rpm; Sealed Speed Rating n3:3800 rpm; Grease Speed Rating n1:3800 rpm; B:52.40 mm; Fillet Radius ra:2.00 mm;

Mass bearing:0.09 kg; r3,4 min.:0.6 mm; Fatigue load limit Pu:0.8 kN; Basic static load rating C0:20 kN; Attainable speed:6800 r/min; ra max.:0.3 mm; Da max.:26 mm; D:32 mm; r1,2 min.:0.3 mm; K:2 mm;

D:42.0000 mm; Grease Speed Rating Open/Shielded n1:17000 rpm; Accessories:Two Shields & Snap-R; d:15.000 mm; Oil Speed Rating n2:20000 rpm; B:13.00 mm; Basic Dynamic Radial Load Rating C:11400 N; Basic Static Radial Load Rating Co:5400 N; Grease Speed Rating n1:17000 rpm; Oil Speed Rating Open/Shiel

Oil Speed Rating n2:4000 rpm; D:180.0000 mm; Shielded or Sealed Co2:134000 N; Width Plain C2:146000 N; Basic Static Radial Load Rating 15º Co1:173000 N; Fillet Radius rb:1.00 mm; Grease Speed Rating n1:3000 rpm; Basic Dynamic Radial Load Rating 40º C1:159000 N; Fillet Radius ra:2.00 mm; B:

D1 ≈:504 mm; d1 ≈:596 mm; Limiting speed:950 r/min; Mass bearing (including seat washer where applicable):32 kg; Minimum load factor A:14; Da max.:543 mm; r1,2 min.:2.1 mm; Basic dynamic load rating C:247 kN; Basic static load rating C0:1660 kN; H:60 mm;

Initial grease fill:878.85 g; R2:37.306 mm; P60°:345 kN; Housing:SSAFS 234; RG:3/4 NPT; P90°:207 kN; Lock washer:W 34; A2:309.575 mm; H2:69.85 mm; Max. speed for Taconite seal:410 r/min;

Basic Dynamic Radial Load Rating C:22500 N; Accessories:One Seal; d:20.000 mm; Grease Speed Rating n1:8500 rpm; Fillet Radius ra:1.00 mm; Sealed Speed Rating n3:8500 rpm; Basic Static Radial Load Rating Co:14600 N; D:52.0000 mm; Oil Speed Rating n2:12000 rpm; B:25.40 mm;

Basic dynamic load rating C:220 kN; da max.:65 mm; Da max.:100 mm; T:39 mm; db min.:66 mm; Fatigue load limit Pu:26 kN; Db min.:104 mm; Da min.:93 mm; Dimension series:2ED; rb max.:2.5 mm;

Mass angle ring:27.5 kg; B1:31 mm; d1 ≈:695 mm; B2:55 mm; d:600 mm; r3,4 min.:6 mm;

Adapter sleeve assembly:SNW 15x2.3/8; H:157.559 mm; End plug (suffix Y):EPR 7; Housing:FSAF 515; J1:47.625 mm; A2:118.666 mm; Labyrinth ring:2 x LOR 36; ba:32.544 mm; P120°:20 kN; Initial grease fill:68.04 g;

R1:120.65 mm; Bearing:22238 CCK/W33; P120°:107 kN; Pa:52.5 kN; da:173.037 mm; S:4.763 mm; Appropriate attachment bolt size G:1.25 in; P60°:290 kN; ba:78.581 mm; J min.:549.275 mm;